Lego 3D Printers

We all love those little bricks from Denmark. Playing with this and everything is possible.  And everything is possible with 3D printers. Doing the previous post, I realised many DIY printers are made of Lego’s.

Instead of writing about that previous post, I decided to made a post 100% about 3D printers in Lego. The machines I’ll be showing you are printing glue, plastic, Lego, or even chocolate!

Continue reading Lego 3D Printers


3D Printers in kit

As you may know, the main subject of this blog is 3D Printing, 3D Printers, especially DIY 3D Printers.
At first, when I fall in love with 3D Printing, I had a Ultimaker2, and time after time, I didn’t see other option than building my own.

I’m not that a handy man as I already said, but now, everyone can afford to start this kind of crazy project: Internet is here to help us!
Today, we will talk about 3D Printer kits.

Continue reading 3D Printers in kit


5 methods to unclog the nozzle of your 3D printer

This may be one of the most common problems you might meet with a 3D printer such as the Ultimaker2. Be realistic: the nozzle diameter is 0.4 mm, it’s tiny so it’s fair if it’s happening.

There are different ways to unclog it, but if the nozzle keep clogging, maybe you had to check something else in your printer.  In this post, again we’ll be focus on the Ultimaker2.

Continue reading 5 methods to unclog the nozzle of your 3D printer



In the end of May, I explained how I started my project to start a FoldaRap. I’m still buying the parts of it. I made another order on Sunday. I’m almost done, I now need to print the parts, to order few mechanicals parts and electronic part for the alimentation of the printer.

That’s tricky, because where I compare the buyer’s guide and building manual, I notice some parts aren’t listed into the guide.

Continue reading 3DIYRap#01


Printing with ABS filament

This post is more for you if you already got a 3D printer. It’s also the occasion to inaugurate the tips category. Today, I’m writing about printing with ABS plastic.

Before going further, and if you want to try this material, be sure your 3D printer got a build-late. It won’t work without. Also, the things I’ll explain are following my experience with the Ultimaker 2, I used this machine to try this material.

Continue reading Printing with ABS filament


6 Things to know before starting to do 3D printing

Since few years now, 3D printers become accessible for personal use, 3D printers you can have in your home, you’d buy if you’re kind of a geek, IT fan, gadget guy or for educational purpose.
For me, it’s pretty clear. I’m quite a 3D nerd and I love to concept objects on my computer since I always dreamed to be an industrial designer. I never though that 3D printing is a alternative I could be able to reach.

Continue reading 6 Things to know before starting to do 3D printing


Do It Yourself in 3D!